Set screws for rear axle.

[Guest]

Does anyone have a source for socket set screws to replace the two cap screws that are in the center of the right rear axle hub casting on the B-10. Not only are they a pain when you need to remove the wheel, but they will not clear the wheel spacers needed when mounting a L-10 loader. The size is 7/16-20x 1/2 or 3/4 long. I could buy a box of 100 from MSC, but maybe someone else already has 98 sitting on their shelf, or knows where you could buy them by the piece.

[PhilD 0]

Hi Greg, I get setscrews and the like from Farm & Fleet or a hardware store like Ace. Another good place is a lawnmower repair shop. All will sell you one or two or however many you want. Phil D

[Erich_Siewert 0]

Are you talking about the diff. lock bolts? Erich