mbarcher Posted February 24, 2009 Posted February 24, 2009 I have a 9020 and the 3 pt hitch arms are missing ... ordered Cat 0 weld on ends to make the arms , but question is how long should the arms be ? As for lift links , I'm making one side fixed length and other adjustable , again what should the lengths of these be ? Any help would be greatly appreciated! see page 26 , part #57 of link below... http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_400_3506_00_XX_S.pdf
Time1992 Posted February 25, 2009 Posted February 25, 2009 Can you show us a pic. of what you are looking for. I will take a pick of the lift arms tomorrow and post with a tape measure. Tim
acfarmer Posted February 25, 2009 Posted February 25, 2009 Since you're frabricating it I'd put adjustable arms on both sides comes in handy lots of times
Time1992 Posted February 25, 2009 Posted February 25, 2009 Here is a pic of the lift arm I think this is what you are talking about.
mbarcher Posted March 2, 2009 Author Posted March 2, 2009 Thanks for the pic ... it helps alot ... now just need to know the length of the left and right lift links
mbarcher Posted March 27, 2009 Author Posted March 27, 2009 Thanks to all who have responded , the pics have helped alot and I have built my arms etc .
mbarcher Posted March 28, 2009 Author Posted March 28, 2009 bought them at a local farm implement dealer. Once I'm done with the tractor , I'll post some pics of what I have and done .
mdmre Posted March 28, 2009 Posted March 28, 2009 If you need the dimensions on part number 22 and 23, they are: from the center of part number 25 to the lower most bolt hole in the raised position is 12.5 inches, in the lowest position it is 17 inches long.
mbarcher Posted March 29, 2009 Author Posted March 29, 2009 Thanks ... that makes things alot easier to finish the lift arms sm01
Recommended Posts