firefoxz1 Posted April 4, 2009 Posted April 4, 2009 I have an A/C 42" snow blower and can't seem to cross it to a Simplicity for a manual. The A/C number is 2025015 or at least I'm sure the tag I have came off this snow blower before I scrapped and painted it. TIA.
PhanDad Posted April 5, 2009 Posted April 5, 2009 The following info is from the snowblowers section of my "Dealers Parts Catalog for Attachments for the B-1 through B-112 Wheel Tractors", dated 7/69. I have the catalog in PDF in you're interested. For 42" blowers, the numbers listed on the parts breakdown pages are 2025082 and 2025098, however I believe the 2025098 is the only 42" blower. The numbers for the 36" single belt blowers are 2025057 and 2025082 (same number as listed for one of the 42" blowers). The number for the 36" 3 belt blower is 2025014. Hope this helps some.
firefoxz1 Posted April 5, 2009 Author Posted April 5, 2009 I can't think of any other attachment I have that is A/C exept a 46" blade and a 42" dozer blade and I am sure I didn't remove those tags beause I left them as is for now. This was not a 3-belt blower, well they weren't 42" anyway. I went to this page on SimpletrACtors but it starts at the B110 http://www.simpletractors.com/what_fits/a-c_guide.htm I also found this page but no 2025015 http://www.simpletractors.com/what_fits/ac_backfit/snowthrowers.htm
firefoxz1 Posted April 5, 2009 Author Posted April 5, 2009 Well I went into blades and found the #. http://www.simpletractors.com/what_fits/ac_backfit/blades.htm I must have taken the tag off the 42" blade I have, must have been peeling already or I wouldn't have done it. So much for this thread, Thanks for your help.
Recommended Posts