Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
JP10

POR 15 results

Recommended Posts

JP10
I heard about POR 15 and thought I'd give it a try on a 42" deck. I bought the starter kit direct from the manufacturer website for $26 including shipping and was pleasantly surprised. It came with degreaser, metal ready "primer" and small 4 oz. can of POR 15. The POR 15 goes a longggggg way. I was able to almost do two full coats with just that 4 oz. can. Just clean it and paint the POR 15 right on the rust. Thought I'd share that info if any one decided to redo a deck. I think it turned out great and it is permanent, you should not have to ever paint your deck again or worry about rust underneath. J-P Before


The kit


After


Share this post


Link to post
Share on other sites
johnmonkey
I did a similar job on a mower deck and later I determined that I needed to remove the spindles. I had to remove the spindle towers with a hammer. That por-15 is tough stuff. jh

Share this post


Link to post
Share on other sites
OrangeMetalGuy
Yup! I did my 48" deck with the silver. Still looks great, and the grass hardly sticks at all. Will give it a good check in the fall when I take it off the tractor and sharpen the blades.


Share this post


Link to post
Share on other sites
Sign in to follow this  

×