Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
sunrunner

Finally got some real teeth

Recommended Posts

sunrunner
Used to have a mid-mount grader blade on a 6218 w/ electric lift, worked great...now that tractor is on tiller duty. Tried using it with this tractor with manual lift(soon to be changed to a electric lift sometime) and the lift lever gets in the way when I stand on the blade. 90 dollars later(including serrated blade) and some mod's, it now fits the rear lift(WIP). The Brinly scraper box works well, but I need meatier teeth;)








Share this post


Link to post
Share on other sites
sunrunner
Got it from Dave in N.Y. and he said someone made some reproductions of the original ones(don't quote mesm01)This is as heavy duty as they get...Will give it a try on the driveway Sunday, all the rain this year left some potholes.Before I used the tiller on the holes in the drive then graded it and rolled, till I broke one arm out of four on the hitch(luckily at the weld). The scraper box works by itself, but takes ALOT of passes.


Share this post


Link to post
Share on other sites
sunrunner
LOL- can't do it now since its on the back - It is a mid-mount blade/frame affixed to a rear hitch - When it was slung underneath the mower, you can stand on the blade an apply pressure to it(the fancy one's had stir-ups) and at 6'4" 245pounds , I/it did a good job^ Before


stir-ups


Share this post


Link to post
Share on other sites
sunrunner
Tried it out today for a little while - my potholes...


after 5 passes


Starting to get ready for Fall




Got this, but have to replace/repair the bungee cord sewn into the canvas




Share this post


Link to post
Share on other sites
Sign in to follow this  

×