Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
AC_B-1Novice

Saw the ad....bought it

Recommended Posts

AC_B-1Novice
It fits models 6100, 6200, and 4200 series. Includes 3 pieces: Snow blade, front hitch, and manual lift bar in orange. back of front hitch could be modified by welding to fit another model. Location: Bolivar, Ohio I made a round trip of 82 miles to buy this...I hope it was worth it the $60.00. The blade is solid, has very little rust just some bad paint. The hitch and lift rod are in very good shape.




Share this post


Link to post
Share on other sites
Simpleton7016
Lots of "meat" left on that scraper bar too. Just FYI too, that as it wears down, you can flip it over so long as you do not wear it all the way down to the carriage bolts.

Share this post


Link to post
Share on other sites
AC_B-1Novice
The picture of the blade is not a good one. It is much better than it looks. It has a small slightly bent up corner at each end of the blade where it scrapes on the ground, never saw that before. The runners look almost new. It is a very thick and heavy blade and will fit 3 of my tractors, the B1, the two landlords but not the 6216 so the ad I think was wrong. Only the B1 is runing at present. It is 10 1/4 inches between the inside edges of the mounting tabs. Thanks for the feedback guys. larry

Share this post


Link to post
Share on other sites
Chris727
Very nice blade, you got a good buy, the wear edge alone would cost almost what you paid for the whole blade. It will also fit your 6216 if you get the adapter mentioned in this post. http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=107709

Share this post


Link to post
Share on other sites
steve-wis
I think a very good price. I bought a blade, lift lever, and mounting frame for my Allis 810GT, and didn't get the bracket that the frame hooks to, had to fab my own. I paid more than you did. Good find!! Steve

Share this post


Link to post
Share on other sites
sunrunner
Just a question - Does it need the adapter to fit it to the frame - All mine do and I've never seen one that doesn't(maybe new to me....) - Otherwise very nice buydOd - Chris


Share this post


Link to post
Share on other sites
AC_B-1Novice
You all are right. It will not fit the 6216 but does fit my B1. I may try to get an adapter as shown in the posted link by Chris727. Right now this novice is building a snow cab on my 6216 and I spent 3 days just trying to get the windshield wiper motor mounted so it would work right and I had to cut off the wiper arm and weld it to make it short enough not to hit the sides of my window. I'm glad that part is done. Now I can start on the door, rest of the windows and then the covering. Eight bolts hold it tight to the tractor and everything is made to come apart if I have to do it. I'll be glad when it is finished so I'll know that I have beat the snow that will be coming. larry

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×