Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Pete

Mower Deck Scalping

Recommended Posts

Pete
My mower deck on my Allis 312 is scalping, even when on the highest setting. Can anyone describe the proper procedure to adjust the deck? I don't have a manual for the deck. Thanks for helping!

Share this post


Link to post
Share on other sites
dlcentral
Check for blades being within 1/8 inch of each other up and down,other when lining up tip to tip. Also the blade angle is adjusted by clevises in the frt. of deck, typically 1/8 to 1/4 inch higher from front to back when blades are facing forward,deck mounted to trac, preferrably on a hard surface.

Share this post


Link to post
Share on other sites
srwven
I agree with dlcent, check the height of the blades in front and rear, then make sure the front is atleast 1/8" (I prefer 1/4") higher than the blade in the back.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×