Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Yeoman627

muffler

Recommended Posts

Yeoman627
I am wondering what the availability is for a 808GT muffler (the Simplicity equalivent is a 6008?) This is the muffler that is down below and in front of the engine, is roughly 12 inches long and 3-4 inches in diameter. What attachmants are available for this mower and how widely do thewy fit compared to other mowers (just this series or many series?) How well will it run a blade or snow thrower? Any special problems with this mower?

Share this post


Link to post
Share on other sites
Sandy_Lake_Imp
Your muffler may be available new. Am at home now so drop us a line or ph 724-376-2489 8-5 eastern. It was amazing how much snow those little guys would push with chains & weights. A little low on HP for a blower. Bill

Share this post


Link to post
Share on other sites
JeffNemes
Actually Simplicity's 6008 used a small square muffler about 4"x4" that is sold by B&S. It bolts directly to the block. Their 6010 10HP used the muffler you are refering to. The larger muffer alone is about $52. I think the exhaust ports are different between an 8 and 10 HP. If so you will either need to get a special AC 8 HP muffler or go with the smaller/cheaper B&S one.

Share this post


Link to post
Share on other sites
JCS
The muffler I was talking about looks like what you describe. I forget what tractor it came off of. The transmsiions was shot and alot of the attaching hardware for the mower deck was missing. I saved the mower deck spindels and housings and the 11 hp? motor that ran good. I sold the rest to someone who needed tires. I think the muffler is o.k. I will look at it tonight.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • kwt
    • Brettw
    • deebig
    • a_sannine
    • ShaunE
    • Brian Shires
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×