7119H Mowing Height

[limitedgun 0]

I have a 7119 that I cannot get to mow level! The right side is about 1 inch higher and the adjuster will not drop it down. I have tried the usual fixes to no avail, any suggestions? Thanks, Mike

[Brent_Baumer 5]

I just e-mailed you the mower installation, leveling procedure and removal pages from the owner's manual. If the photo in figure 37 is not clear, e-mail me and I'll re-scan at a higher resolution. If this is not helpful enough, try doing a keyword search for "level", "height", "cut", "mower", "deck" etc. This procedure has been discussed on this site many times before. Hope this helps. Brent

[JeffH 0]

I have similar problem on 7117H. Check tire pressure... Also, check for bent spindle. I think this is my problem