Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
MPH

Movin In

Recommended Posts

MPH
Remember that tractor shed I built last fall?? Well, this morning I finally started putting it to intended use.


The blue B-1, a Big 10 or B-10, hood says one thing side panel says the other, plus what is suppose to be a complete B-112. Considering the shape of it it could become parts. br]


A 14hp Briggs stored in a Gilson}:)


And a series 1400 MTD. Main interest in seeing what's wrong with the hydro drive, pump seems to work strong, and get it going is the Briggs runs real good and it could be living proof that MTD at one time built real garden tractors.


All non runners in one stall of the barn.sm02


Used the A frame 3 point hitch for my York rake on the 4040 for the toll job, worked good except on the B-1 with two flat front tires, hadda raise the tractor over the stud bolt.

Share this post


Link to post
Share on other sites
JohnMBerst
Always nice to have "space" to store stuff. Put them away in the order to be worked on??? Haha. Great to have a pick-up tractor to move stuff. Looks great. Another job well done! sm01

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Who's Online (See full list)

    • Basscor
    • Sw1966
    • BLT
    • MARK (LI)
  • Today's Birthdays

    1. glolive
      glolive
      (71 years old)
    2. lampoulos
      lampoulos
      (41 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×