Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
THEPATRIOT

New B112!

Recommended Posts

THEPATRIOT
Got it from a friend.It had an easy life towing a small cart around picking up leaves,stickes ect...With an old man behind the wheel.It hasn't ran in 3-4 yrs.Everything looks to be nice and tight. This will be my winter rig with the 42in. snowthrower.It even came with FOUR guide lights! 8D




Share this post


Link to post
Share on other sites
Leroy
In an effort to make your deal look that much better. Here is one i just got. [IMG]http://i203.photobucket.com/albums/aa71/Leroy003/Tractor/IMG_7332.jpg[/IMG] [IMG]http://i203.photobucket.com/albums/aa71/Leroy003/Tractor/IMG_7333.jpg[/IMG] [IMG]http://i203.photobucket.com/albums/aa71/Leroy003/Tractor/IMG_7330.jpg[/IMG] [IMG]http://i203.photobucket.com/albums/aa71/Leroy003/Tractor/IMG_7334.jpg[/IMG]

Share this post


Link to post
Share on other sites
Leroy
The nut on the bottom of the needle valve broke when i just pinched it with my fingers. Due to electrolysis failure, those pieces could have became powder with very little trouble. I don't want to say i haven't seen one in worse condition but this one is close. Side covers are missing The hood was taken off for the pics most other parts are here but which ones are good is yet to be lernt. I am grateful for the hydro lift but this is not at the top of my list yet. You found a nice B112. I didn't see your hydro lift handle can you take a pic of it?

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Who's Online (See full list)

    • willsmith123
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×