what engine is this from?

[RayS]

[img]/club2/attach/RayS/briggs.JPG[/img]
Is this from a 19D, 23D or will it fit both? Was it on the 700 & 725 model tractors? Does anybody have a part number? Thanks for any help.

[dentwizz]

Looks different from the one on the 23D and 243xxx.

[Chris727]

I have owned the 700 and 725s and neither had one of these. The driveshaft bolts directly to the S/G belt pulley.

[RayS]

Ok, Thanks.

[wilm169]

Ray it looks more on the idea of a 7000, The drive shaft sticks in it some.

[SmilinSam]

Dont ring any bells here... but then again I think my bell is crackedOO

[Storm7012]

I'll check tomorrow, but seems like my 64' LL had one. That would be the 23D. I'll get back to ya.

[Storm7012]

It looks a little like the 64' and 23D. It's hard to see on the tractor. Seems like the pulley was three pieces. I looked today, but can't really tell, guess I'm no help.

[Willy]

Looks like its off a 23. My Big-10 has one that look about the same- A/C part#2026509 Hub Drive.

[perry]

i have never seen that style. the older ones had the raised coupler built into the flywheel pulley.

[Willy]

The hub bolts to the eng and the flex coupler bolts to the hub and drive shaft,

[MrSteele]

I took a similar one off my 243000 with the wrong sheetmetal, so. I do not know where it came from, but I'll look at an AB shortly when it slows flooding a bit

[MrSteele]

Not off the AB, but it looks like the center of the booster fan off the 16 that came off a Ford tractor and I put on my Landlord. I had to remove the booster fan and flywheel that was on the 16 and put the parts from a 243400 on it to make it work with the Landlord, for the driveshaft to work.