Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
perry

quick question - mower deck

Recommended Posts

perry
will a 42" mower deck from a 2110 fit a 7116H tractor ?. im meeting a guy halfway to do some trading and just want to make sure the deck will work for the guy. im stuck in the 60's, so im not too familiar with the newer tractors....thanks sm01

Share this post


Link to post
Share on other sites
D-17_Dave
Same basicdeck, with some variations. Newer decks have a wider adjustment frame from the pivot points to the roller adjustment levers. This gets them outside of the running boards for good clearance. The newer decks also have a different drive pulley on the top of the center spindal. Will they work, yes. But some mods will need to be made.

Share this post


Link to post
Share on other sites
Chris727
quote:
Originally posted by perry
so it will fit and work the way it is, but with parts from his old deck it should be the same as what he has . thanks...guys
It will fit but it won't work correctly until the parts are swapped over. The old FDT decks don't have the holes for the carriage bolts pre-drilled so he will need to drill the bolt holes in order to put his newer roller bar and height adjusters on it. As-is the deck will also run at a different speed because as Dave pointed out, the center pulley is a different size. He will also need to put the later style idler arm on it which has the eylet for the cable to lift the deck.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • tadams
    • MARK (LI)
    • s_stephen
    • BLT
    • smalljob
    • PhanDad
    • RWB78
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×