Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
perry

need a belt size.

Recommended Posts

perry
whats the belt length from the center PTO to the 42" deck on a landlord 2110 tractor. the tractor is 50 miles away from me and im trying to figure out the belt size's. i thought they where 44" but maybe thats for more landlord101/B-10's. my father-inlaw bought a 44" belt and he says it wont fit too tight.

Share this post


Link to post
Share on other sites
perry
quote:
Originally posted by dentwizz
super thick grass I use a 1/2"-43" for more pressure.
becarefull when useing to tight of a belt. puts more stress on the center mandrel. i had a mandrel split around the bolt mount flange useing too tight of a belt. i dont know what my father-inlaw has going on , but he said a 44" belt is too small. i told him it calls for a 44.1". unless im reading the belt chart wrong and the 44.1 belt is for the 2010's.

Share this post


Link to post
Share on other sites
perry
quote:
Originally posted by Chris727
Does he have the 35" belt on the PTO
yep, that was it. he had a 34" belt on the side pto and stuff was out of adjustment. i took him a 35" belt and a 44" and went threw all the adjustments. seems to work good, for now.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • PhanDad
    • ArtK
    • joelk
    • HotRod2
    • Bill725
    • Allis Chalmers
  • Today's Birthdays

    1. r32ford
      r32ford
      (81 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×