daveb 1 Posted June 15, 2010 I know it has been talked about before. what tire and wheel can i put on the front of my 720? i would love to put on a set of tri ribs. I have a pair if 4x12 ags that worked (until one tore open and blew the tube) they rubed the deck. all suggestions welcomed. Thanks Dave Share this post Link to post Share on other sites
timflury 1 Posted June 15, 2010 http://www.kenjones.com/Scripts/XListSearch.aspx?XGID=FRONTF2_400x12&calledFrom= Here's some. You would need a 4" wide rim. There are plenty of places where you can buy tires. Share this post Link to post Share on other sites
gregnorth 0 Posted July 16, 2010 i thought i was the only one who had the tires rub the deck on my 4041. i had carlisles on it that rubbed the deck but i didnt like looks of those so i found a pair of barely used titans which match my rear tires but they rub too. i do have my deck as high as it will go. maybe if i lowered it it would rub less. later, greg. Share this post Link to post Share on other sites
PeppyDan 3 Posted July 16, 2010 Mine has the factory front tires and the deck is set to cut at 2 1/2 inches. Tires always rub when I turn sharply. It's a common problem. Maybe someone could get a 36", 42", or 48" deck to fit under a Powermax&:):YXX(, it would mean more seat time!:D8D:p Dan Share this post Link to post Share on other sites