32 " drive arbor

[lumpy 0]

restoring a deck and the arbor on this one is well grooved and is quite sloppy in the bearings. does anyone have a source for the old arbors PN is 108369 according to the manual. Is there a way to have a shop add metal to it and throw it on a lathe to "refresh" it ?? just a thought , an help is appreciated. Lumpy

[Chris727 1,110]

Still available new from a Simplicity Dealer. New part number is 2108369 and it sells for $44.45 at Jacks Small Engines website.

[Brettw 620]

For $44 I have seen complete decks on Craigs for that or less. Might look there first and find a number of needed parts.

[tacklebox 0]

I have welded and re-machined them in the past, but since I have access to a machine shop and welder, and most parts are from common size stock, I just make my own on breaks and after work. But, yes, it can be done. It will probably cost more than a new part though.