Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

9020 Tires

Recommended Posts

The lug tire were an option on these tractors with a different rim. The turf tires really never wear all that much so swapping them isn't real common. As for swapping them out to cleats, an online search is as good a place to start as any.

Share this post

Link to post
Share on other sites
i believe that the turf tire option used the 29 12 15 tire in the rear and wider 10 inch wheels in front but if you got the ag tire setup it came with a set of 4 12 front tires and 8 16 rear ag tires.you can get ags in 29 12 15.

Share this post

Link to post
Share on other sites
get online. go to nebraskatire.com click on lawn/ golf then lawn and garden. walla! the ones i bought were titan blems 29-12.50-15 and i love them. the only problem i had was titan made 2 different ones. 1 has a flat tread and the other has a slightly rounded tread. well they sent me one of each. i couldnt even tell until they were on the rims. rounded was about an inch taller.so i called them and they said they couldnt tell the difference either. they said they would send me 1 more and it would match one or the other of mine. 3 days later i got another tire no cost no shipping and they told me to keep the other one for a spare. then i found 2 titans for the front on craigs list for $40. good luck, greg.

Share this post

Link to post
Share on other sites
Here is a picture of the 8-16's with 4.00-12's on the front. The factory AG tire setup.
John U

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
      · 1 reply
  • Adverts