Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
yukon

7790 diesel

Recommended Posts

CarlH
Which pump is leaking? Injection pump or lift pump? I've not found any kits for the lift pump, your least cost solution is to remove it block off the holes and install an electric fuel pump. If it's the injection pump, it might be a previous owner has replaced the internal O-rings with the wrong size. It might also be leaking banjo fittings - you can cut off the crimped clamps, install new hose, and use regular clamps.

Share this post


Link to post
Share on other sites
427435
If the leak is coming from the top of the injection pump, it's probably the small 0-ring that is on the top of the fuel line coupling. Or it's the copper washer under the coupling. Do a search on 7790 and there is a lot or reading-----one of them shows a picture of the fuel pump and likely leak points.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • tadams
    • smalljob
    • MARK (LI)
    • s_stephen
    • BLT
    • PhanDad
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×