Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Starting A New Build Thread


Bull_79

Recommended Posts

I am going to start a new thread so that the images are the right size. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor2007.jpg[/IMG] You like my little touch on the tank I know you never see it but I bedlinered the bottom [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor2009.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor2011.jpg[/IMG]
Link to comment
Share on other sites

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

  • Bull_79

    33

  • rsnik

    5

  • THEPATRIOT

    4

  • dentwizz

    3

nice! 8D. good call on the bedliner gas tank ^. do you think that little muffler will have too much restriction ?. just a thought.but good idea thou .
Link to comment
Share on other sites

Well, she's a Landlord. With the eyebrow fenders she is a round hood Landlord. With the hydraulic lift "hole" she is not a Black Landlord, unless you swapped out the sub frame under the dash. However you have the Black Landlord drive shaft coupler. The Landlord 101 was the first to have the fiberglass disc coupler and the straight key BGB as opposed to the Woodruff key BGB. So I am guessing this is a Round Hood build using good, solid parts. You have both side panels painted so I gather no hydraulic lift. Buy, borrow or steal hydraulic lift and install it during the build and it is not only worth more than the money, the tractor will be your favorite forever.
Link to comment
Share on other sites

Yeah that little muffler is getting both ends cut off and turned down to be a press fit in the pipe,just something to quiet it down a little ;-) . Yeah it's not a hydraulic lift,but no big deal lifting that deck isn't bad with that arm. I'll keep them comming Mike,I like to take pictures and keep a record of my builds. I am going to make a youtube video any day now of my progress. I just ordered a carb rebuild kit and a gasket set for the motor so I will tare into that next.
Link to comment
Share on other sites

Here's me lifting the motor out a couple weeks ago I set the timer on the camera and it cut my head off oh well you don't want to see my ugly mug anyhow haha. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/TractorMotor002.jpg[/IMG]
Link to comment
Share on other sites

Looks like you have a good start, keep up the good work and keep us updated. We just love pics. here:Dsm06dOd
Link to comment
Share on other sites

Man you guys won't believe how nice the paintjob turned out on that seat. I tried something a little different as far as technique goes and wow for a rattlecan. I gave it a light first coat then the second coat I let it rip and it being 100degrees outside running wasn't an issue. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor3004-1.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor3002-1.jpg[/IMG] This is the aircleaner as like you didn't know. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor3005-1.jpg[/IMG]
Link to comment
Share on other sites

quote:
Originally posted by Bull_79
Man you guys won't believe how nice the paintjob turned out on that seat. I tried something a little different as far as technique goes and wow for a rattlecan. I gave it a light first coat then the second coat I let it rip and it being 100degrees outside running wasn't an issue.
Wow! That looks great for a rattlecan job!dOd Mike sm06
Link to comment
Share on other sites

Well started stripping the motor down and ever since I bought this thing it smelled like urine now I know why!!! Check that picture out man I bet this thing go HOT with all that crap in there made a nice home for that mouse til it got started up haha.dOd [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/Tractor4001.jpg[/IMG]
Link to comment
Share on other sites

Wow! I love the pictures and progress you are making. Enjoy seeing the progress and keep us updated. I am learning quite a bit from your task at hand.
Link to comment
Share on other sites

I almost puked taking that mouse nest out it filled that entire void in the cover and stunk so bad like ammonia :Y.I just held the shopvac up against it while I used needle nose pliers to pull it out. But it's all worth it,what we do to save these old tractorsdOd.
Link to comment
Share on other sites

Went to take off the rear wheels and when I did the hub fell right off keyway and all HOLY! glad I didn't drive this much. The 2 set screws weren't tight that hold it to the shaftsm00. I mean to all you guys that buy these old tractors and just put them right to use here's 2 examples why to check them out. 1.That mouse nest wasn't visible till I took the covers off and could of cause a fire after I parked it in the garage. 2.That wheel could have fell off while I was mowing and who knows what could of happened then OO. Any many other reasons but that's just the 2 I came across so far.
Link to comment
Share on other sites

Got some parts to take to the sandblaster.Got the snowplow yesterday thanks to GregB from LancasterdOd [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/TractorMotor002-1.jpg[/IMG] Not much without tires on it huh? [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/TractorMotor004.jpg[/IMG] The hub that fell off OO. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/TractorMotor006.jpg[/IMG] Got it up on blocks dOd. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/TractorMotor009-1.jpg[/IMG]
Link to comment
Share on other sites

Tomorrow I pick up the stuff from the sandblasters that was quick only one day :-). I'll take some pictures and post them for you all before I paint everything. Well project might be put on hold just for a little while,my wife is 9 months pregnant and the new baby is comming thursday they are going to induce her. This is my second child and is going to be a surprise boy/girl???? :D So wish me luck everyone and I'll post some pictures of the new addition to my family soon hopefully.
Link to comment
Share on other sites

Here's some more blasted parts. Blasted this stuff at work. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/sandblasting006.jpg[/IMG] Took this to the guy down the road $40.00 to do it all plow,bracket,hood,seat pan,and the 2 rear rims. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/sandblasting001.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/sandblasting002.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/sandblasting004.jpg[/IMG] And I scooped up 2 50lbs weights that we make at work. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/sandblasting007.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/sandblasting005.jpg[/IMG]
Link to comment
Share on other sites

  • 2 weeks later...
Did some painting today,wait til you guys see the plowblade I didn't something a little different on it I hope it works. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/tractorhood001.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/tractorhood002.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/tractorhood004.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/tractorhood005.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/tractorhood007.jpg[/IMG]
Link to comment
Share on other sites

quote:
Originally posted by rsnik
With the hydraulic lift "hole" she is not a Black Landlord, unless you swapped out the sub frame under the dash.
The 63/64 Landlord with the black dash has the hydro mounting hole. I have Four 63/64 Landlord/Early B-10s, all with the hydro hole. Not sure where you got the info that the 63/64 dash sub frame wasn't equipped, but..they are. At least the 2 dozen or so that have come through my shop have had the holes to mount. Am I missing something about earlier 63/64 Landlords or B-10s that don't have these 5 mounting holes? That would be an interesting find.
Link to comment
Share on other sites

Here's the plow,again I am obsessed with this duplicolor bedliner paint I use it alot with anything I do. That stuff holds up sooooo much better then paint and looks great,just remember if you use it do a nice primer coat first. [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/snowplow003.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/snowplow001.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/snowplow002.jpg[/IMG] [IMG]http://i733.photobucket.com/albums/ww337/bcarbaugh/Tractor%20Build/tractorhood007.jpg[/IMG]
Link to comment
Share on other sites


×
×
  • Create New...