Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Yesterday's Haul

Recommended Posts

Yesterday was a good day for me. I purchased a 3310V, 7018H, Two 42" decks and a Briggs Model 320421 engine in pieces for a total of $150. The owner said the tractors had not been run in a couple of years but after working with them today, I got both of them running and neither smoke or make any strange noises. The 7018 has been repowered with a 16 hp Kohler K341. Transmissions in both work good. The Briggs Model 320421 engine has std. bore so is rebuildable. Is that a 14 hp model? Another good thing for me is that they were only 20 miles from my home.

Share this post

Link to post
Share on other sites
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
      · 1 reply
  • Adverts