Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
joelk

Attachment Compatability

Recommended Posts

joelk
Will the 42" blower from my 3112H fit on a 3410H that does not have a front PTO option? My blower has a engagement lever that is part of the blower, but I am not sure if this will work with the frame around the front of the 3410H. Also will the 48" deck fit on the 3410H as well? Thanks for your help.

Share this post


Link to post
Share on other sites
Chris727
The deck will fit, but you might need to put a different pulley on center arbor in order to get the correct blade tip speed. As far as the blower goes I don't think it will fit correcty with the added front frame length on the 3400's.

Share this post


Link to post
Share on other sites
Burntime
As others have said it will work but the hitch is wrong. It is a 2 pulley hitch but too short and the 3400 engauge like the cutting deck on the opposite side of the tractor. You would need a front pto or modify yours to run the mid pto and a single pulley hitch.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    1. Tired Iron
      Tired Iron
      (44 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×