Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
WEB

B-208 Regulator

Recommended Posts

WEB
I am trying to get a B-208 running. It has been setting 12 yrs. with no electrical wiring done and missing voltage regulator. The tractor SN is 11366. The B/S engine is 191701 0122-1 6911261. The Delco Remy S/G is 1101695. Can someone tell me the voltage regulator I need and maybe where to get it? THANKS!

Share this post


Link to post
Share on other sites
RayS
Welcome to the club! http://www.partstree.com/parts/?lc=briggs_and_stratton&mn=191701-0110-99&dn=58530005 501A Diagram: 191701-0110-99 Electric Starter,Alternators BRP Briggs and Stratton part number 295924 or delco 1118988 Regulator (Flat Mount, Delco-remy) http://desc.shop.ebay.com/i.html?LH_TitleDesc=1&_nkw=voltage+regulator+delco+1118988+&_cqr=true&_nkwusc=voltage+regulator+dlco+1118988&_sop=10&_rdc=2

Share this post


Link to post
Share on other sites
Billfo
I know this is an older thread, but I was wondering - does anyone know if there exists an engine bracket for the LONG frame Delco starter that will bolt-up in place of the short frame bracket that is shown in the exploded parts link Ray listed in the previous post? Remember this is for the 7-8 HP vertical shaft Briggs. The reason I ask is because the long frame starter-Gens seem much more readily available.

Share this post


Link to post
Share on other sites
BLT
quote:
Originally posted by Billfo
I know this is an older thread, but I was wondering - does anyone know if there exists an engine bracket for the LONG frame Delco starter that will bolt-up in place of the short frame bracket that is shown in the exploded parts link Ray listed in the previous post? Remember this is for the 7-8 HP vertical shaft Briggs. The reason I ask is because the long frame starter-Gens seem much more readily available.
This company http://www.waiglobal.com/alternators.html is the one of the largest in the USA doing aftermarket starters alternators and parts galore. If you have a starter generator repair source out your way. They can supply you a new one. They are pricey because of the low volume, around $65.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • bowhunt4life
    • Tom45
    • Bear
    • deebig
    • Ronald Hribar
    • SmilinSam
    • a_sannine
  • Today's Birthdays

    1. Chad Bartlett
      Chad Bartlett
      (37 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×