THEPATRIOT 0 Posted August 31, 2010 I picked up 2 front trip blades.The frame on this one is a little longer,and the lift bracket is different.Does this look like it would fit the longer 7100 series??? Share this post Link to post Share on other sites
cwm1276 11 Posted August 31, 2010 My first guess would be you have a FDT blade and a RBT blade. The lift bracket was moved out for the RBT to clear the wider hoods. Again just my first guess. :D Share this post Link to post Share on other sites
Brettw 1,016 Posted August 31, 2010 I believe it will fit just fine. You will need the right length lift rod however. Share this post Link to post Share on other sites
THEPATRIOT 0 Posted August 31, 2010 quote:Originally posted by Brettw I believe it will fit just fine. You will need the right length lift rod however. I hope so,i've been wanting one for a while. Share this post Link to post Share on other sites
captainweezy 0 Posted August 31, 2010 Shouldn't be a problem at all. Nice find. Its even remote angle. Share this post Link to post Share on other sites
stevenj 4 Posted September 1, 2010 I believe that there are three different hitches. The one with the angled back lift arm was used on FDT. Then there is the one like you have shown in this picture. Then there was a third version which had a lift arm like the one in the picture, but there was an additional angled brace that went from the top of the lift arm down to the hitch. Share this post Link to post Share on other sites