Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
305SS

vickers filter

Recommended Posts

305SS
Does any one use a different filter ( other than the simplicity ) for the hydro. They are now $50.00 for a filter from simplicity. All I know is that they are 20 micron filters. Thank for the help.

Share this post


Link to post
Share on other sites
RayS
Purolator - H20247 Wix - 51467 http://simpletractors.com/club2/topic.asp?TOPIC_ID=112444&SearchTerms=51467 http://simpletractors.com/club2/topic.asp?TOPIC_ID=111406&SearchTerms=51467 http://simpletractors.com/club2/topic.asp?TOPIC_ID=107838&SearchTerms=51467

Share this post


Link to post
Share on other sites
midnightpumpkin
I replaced my Vickers filter with a NAPA 1467. After I did the replacement I discovered the NAPA 1300 filter (WIX 51300) which looks to be an exact match to the filter I took out. The 1467 is taller and has a small hole at the top and a large hole at the bottom, whereas the 1300 has the same size holes top and bottom and comes with 3 different cover gsskets. The NAPA 1300 is also cheaper than the 1467 by a few dollars, both are rated at 19 Microns. In the future I will use the NAPA 1300 filter on the Vickers. John U

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • gwiseman
    • kwt
    • JohnMBerst
    • Jonstephens01
    • tripleguy
    • deebig
    • Bear
  • Today's Birthdays

    1. Jcarlton300@gmail.com
      Jcarlton300@gmail.com
      (30 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×