Simplicity85 0 Posted September 10, 2010 Hey guys how dose the belt go on a 707 Broadmoor snowblower ? Thanks Share this post Link to post Share on other sites
wilm169 1 Posted September 10, 2010 http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCBEN8arG4rE3Cvh5kbp796Dq Share this post Link to post Share on other sites
timflury 1 Posted September 11, 2010 It's funky, but a good design. Just remember to keep the hopper full. Also, when installing the belt, remember, on the left pulley on the PTO, the belt guide gets swung out of the way. Correct tension adjustment is the key to keeping the belt on the pulleys. On my Serf, if there's less than say three inches on the ground, I run the tractor in third and the Hi/Lo in low. Share this post Link to post Share on other sites