larry8200 4 Posted September 16, 2010 I changed the filter and fluid a few days ago. Warmed it up good before draining it. Filled the filter before installing it. The total amount of Dexron used was just over 1.5 quarts, just over half the 96 oz. the specs say it takes. It's working fine but I wonder... Does the pump and motor hold over a quart that wont drain? Just curious. Share this post Link to post Share on other sites
glennsjr 0 Posted October 3, 2010 Just did my AC712 and mine took 3 Qt's. Share this post Link to post Share on other sites
SmilinSam 3,623 Posted October 3, 2010 Theres a little spring loaded vent on the side of the transmission I usually end up holding open with my fingers to drain and fill the tranny. I usually get 3 quarts + when I drain one. Share this post Link to post Share on other sites
larry8200 4 Posted October 3, 2010 quote:Originally posted by SmilinSam Theres a little spring loaded vent on the side of the transmission I usually end up holding open with my fingers to drain and fill the tranny. I usually get 3 quarts + when I drain one. Thanks, I knew there must be something. I'll remember that. :) Share this post Link to post Share on other sites
OrangeMetalGuy 20 Posted October 4, 2010 You also need to hold that vent up when you refill, so that all the air gets out. Share this post Link to post Share on other sites