Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Briggs Vanguard not charging


Les

Recommended Posts

We fix lots of these in our shop. 99% of the time its the regulator. We first check the output of the stator under the flywheel. It should be 28 - 32 volts AC at full throttle. Yellow plug with two spade connectors. Check voltage between the two. Next red wire that is hooked to the regulator should have 12 volts on it with the key on. If all the above checks out. Change the regulator. Hope this helps!! olf20 / Bob
Link to comment
Share on other sites

  • 5 weeks later...
Thanks for the help. Ordered a new Oregon voltage regulator for $39.48 and it charges fine now. I figure the Oregon part cant be any worse than the original Briggs part! About half the price.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...