disc

[mech123 0]

has anyone made is pull behind disc for a 4041. i have access to an older one from a farm tractor 4 free and was gonna try and cut it down to fit the powermax

[acfarmer 1]

Making a disk harrow smaller would be a sizable task because of the frame and axles on a disk are usually threaded.There were small disks built that a Power Max can pull usually for tractos like a Farmall Cub or G Allis Chalmers

[SmilinSam 3,623]

I modified this mini disc made by Swisher for their Quadivator platform.. I have painted it since this picture was taken.
[img]http://i686.photobucket.com/albums/vv227/Smilinsam/Picture193.jpg[/img]

[MPH 12]

I'd go for it and basicly copy Sams, ecept replace the crank with a hydro cyl. The bigger dia disc blades would dig/cut better then the 13 inch garden tractor size. It'd take some doing but I'd love to find one to buy cheap much less get for free. someone made a field culitavator on here once,

[MowerMechanic 0]

i have a disc set that i got when i bought my 6500, cant remember what the make is. here is a link to the vid. not the best shot but you get the idea http://www.youtube.com/watch?v=PDZzeil87K8