LesH 1 Posted October 29, 2010 Got my Trac-Vac out today and thought i would start the leaf vaacuuming but am having some engine trouble. It has the 5 HP Briggs Model 130232 with the Pulsa-Jet style carburetor. It was running erratic like there was dirt in the carb so I removed tank and carb. I cleaned the tank/ removed jet and cleaned/ cleaned and blew out a;ll the passages and pick up tubes. Then reassembled. It starts and runs like it had a float-- wanting to flood out then run lean. After it is running I start to unscrew the gas cap and then the engine quits. I done that several times. Any ideas or suggestions??? Thanks. Share this post Link to post Share on other sites
BLT 708 Posted October 29, 2010 Did you replace diaphragm gasket? Most carb problems are a result of that. Share this post Link to post Share on other sites