Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
JCS

Mower deck & belt

Recommended Posts

JCS
To continue a earlier post, I have Simplicity 7016 MFG 1690423 with a 48 inch deck with MFG 990576 (i think). The dealer sold me belt # 163011 but it slips in tall grass. My input pully is 4 1/2 inches and is held on with 3 bolts. The CROSS-REFERENCE thing isnt much help for the 990576 mower deck. So what belt should I be using???

Share this post


Link to post
Share on other sites
JayM
JC, just sent you an email off list. The owner's manual for my 48" deck shows Mfg. No. 740. The drive belt number in the manual is 163011. That's what I'm running on my 48 incher. See the next message on this Discussion page for my solution. Good luck in solving a frustrating situation. Jay M.

Share this post


Link to post
Share on other sites
dlcentral
The 163011 is too long with the 4 in pulley.That's an old deck,not really meant for the 7016,108505 is 70.1 in. the 163011 is 71.4in. long Pulleys on trac should be; upper backside idler;3.5 in lower V-idler;5in.Sounds like you need either a bigger[5-6in.]mower pulley or a smaller belt.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×