Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

electrical help.


RUMBLEFISH

Recommended Posts

I am starting to put back my B212 and noticed something I over looked. In the pic you can see 2 wires one to the points and the other one with the little metal hoop I have no idea were it goes. On my Big Ten I ran a jumper from the points to that little clip on the cover then the main wire from the ignition. Am I doing the same tha the wire was doing in theory or do I have to rip the whole thing down again.}:) [IMG]http://img844.imageshack.us/img844/4258/wiresa.jpg[/IMG]
Link to comment
Share on other sites

Rick on the B110 it goes to the stove bolt right beside it and the kill switch from the key hooks to it (better get a second opinion). I'am not sure about the B212..
Link to comment
Share on other sites

The small tab at the top of the points cover is melamine or some other insulator, and as stated is for the kill switch to ground out the ignition.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...