B10 not starting

[bgosh]

Decided to change points and condenser to get this running and after waiting for them to come I forgot how the wiring was to be put back and there doesn't seem to be a diagram as how they should go, I was wondering if someone would give me a heads up on this? Like how many wires come out of the point box and where is it that they go to? Thank You in advance :(Stan

[bowhunt4life]

You should be able to go off of the Landlord wiring diagram as the B10's are the same. I am not sure where to look on the site for the diagram but be patient some of our members will know right away and post a link.

[BLT]

The condensor is wired to the terminal on the points, then a short jumper wire is also on the points then brought out thru the point box to the bakelite terminal strip. From there you connect your coil wire and ignition wire to the bakelite strip and should be good to go.