mike_sdak Posted April 28, 2011 Posted April 28, 2011 Here is my version of a worklight mount, based on ideas gleaned from this forum. Briefly: I used a cheap 12.00 worklight, with a u-shaped bracket mount. Used 1/4" iron pipe (close nipple) as conduit thru the u-shaped bracket and the fender deck. (The u-shaped bracket needed to be bored to the OD of the 1/4" pipe). Used a stack of washers to account for the length of the close nipple. For the nuts on the pipe nipple, I used a 1/4 iron pipe coupler, cut in half (use half of coupler for each nut). I hope this is useful in some way. I hope to utilize it when tilling in a week or two, after dark...
AC_B-1Novice Posted April 29, 2011 Posted April 29, 2011 Looks nice, that should scare the nightcrawlers. :D
mike_sdak Posted April 29, 2011 Author Posted April 29, 2011 Unfortunately, the deere deck is closer to operational than my Allis Deck. More projects than time,
Recommended Posts