RUMBLEFISH Posted May 21, 2011 Posted May 21, 2011 I have a 48 deck from a b212 that is a real solid shell. I have a 48 deck from a 712 that is a real rat. Can I transfer all the stuff from the 712 deck over to the b212 deck to make it work on the 712? I hope that makes sense.:o)
MDB Posted May 21, 2011 Posted May 21, 2011 If they both have the same style spindle it work just fine.
MPH Posted May 21, 2011 Posted May 21, 2011 You may have to drill new holes where the cradle mounts back by the rollers I believe the RBT's had a wider cradle because of that wasted iron put on them to rest your feet on.
RayS Posted May 22, 2011 Posted May 22, 2011 It will work but the adjusters will hit those nice running boards. The top pulley on the center arbor is smaller but I use a different belt.
Recommended Posts