Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

I got the Sovereign running (long)

Recommended Posts

Thanks for everyones help!!!!!!!!!!! I finally got the tractor running and starting with very little effort. I got this free from a freind After sitting for two year out in the weather(last owner). I had time to work on it.I cleaned the points,gas tank and carb. I also put a new condensor on it cost me 8.00 and some time. Now i'm in love with it. can anyone tell me what type of fluids I need to drain and fill with new.

Share this post

Link to post
Share on other sites
I'm speaking in ignorance of your particular model tractor, but since no one else has replied yet... If it has a bevel gear box in the tractor midsection, check that first thing. We bought a used piece and assumed there was oil "in dat dere ting." Well, it was nearly dry and ultimately resulted in ripping the machine in two to replace the bevel gears. Also check the transmission fluid in the rear axle housing. I would recommend replacing both if you have the time - gets any moisture out that could possibly be in there. From the school of hard knocks, Tom

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Bill725
    • SmilinSam
    • MARK (LI)
    • Sovereignm88
    • Tom45
    • a_sannine
  • Today's Birthdays

    1. 720nut
      (66 years old)
    2. Joe Scann
      Joe Scann
      (79 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts