Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

3416H Problems backing up.


Guest

Recommended Posts

I have a 3416H that works great, except for backing up. If I'm on level ground or start out on level ground it works ok, but if i try starting out on even the slightest incline it only creeps. I replaced the filter and made sure it was bled out ok, but it didn't help any. Forward has always worked fine. If anyone has any ideas they would be greatly appreciated.
Link to comment
Share on other sites

Adjustment is under seat for that problem.But as you get more rev. speed you'll lose some forward speed.The adj is the long nut with the 2 jam nuts on the speed control rod.Jack both wheels up,make the rod longer by turning the nut for more rev,,
Link to comment
Share on other sites

Sandy_Lake_Imp
Check for lost motion at the control linkage ball joint. Travel in reverse is very short & slop will rob speed quickly. Bill
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...