Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
mowinman2

The shed is getting full

Recommended Posts

mowinman2
A friend just recently told me I should come up and take a look at some little Simplicity mowers he has in his building. He just wanted to get rid of them as he knew he would never mess with them. Turns out he saved each one from a scrap yard. Ive never messed with this type of Simplicity, but it looks to be fun. I feel confident I can make one if not two good Wonderboys. For $40, I couldnt resist! [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/1.jpg[/IMG] [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/4.jpg[/IMG] [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/5.jpg[/IMG] My buddy is more into the big AC tractors... [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/7.jpg[/IMG] ALSO, I just picked up a 3210v Landlord. This is another first for me. Had been sitting out with the hood off in the dirt. Pushed it into the truck. Got home, put a new battery in it, and with a little spritz of gas in the carb, it was running!!! I poured gas in the tank but couldnt get it to do anything. Realized the fuel filter was stopped up, installed new, and away it went. Runs like a top and hasnt skipped a beat. I havent made a single adjustment to anything. I have really started to like this one. Its a keeper for sure! For $75, I had to bring it home. [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/landlord4.jpg[/IMG] [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/landlord3.jpg[/IMG] [IMG]http://i1023.photobucket.com/albums/af355/Iluvtruks0/landlord2.jpg[/IMG]

Share this post


Link to post
Share on other sites
steve-wis
Very nice find. You will have lots of fun with the wonderboys. I have a 575 stick steer and a 400, both running and working. The 400 has an oil leak that needs to be fixed, other wise both cut grass. Lots of fun, you will enjoy it! Steve

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Who's Online (See full list)

    • bowhunt4life
    • smalljob
    • GregB
    • gwiseman
    • rokon2813
    • tadams
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×