Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
phillobbezoo

power max snow blower

Recommended Posts

phillobbezoo
i bought a snow blower this past summer for my 9020 my tractor was wired for the electric motor the turns the spout but it dosent get power. So i looked underneith the dash and the power wire isent hooked up to any thing. Does any one know were its supose to get its power from? any help would be appretiated thanks in advance

Share this post


Link to post
Share on other sites
PatterBrian
On my tractor, there was a toggle on the dash which had a spring return to the center position. Up rotates left, down rotates right. It was wired to the rotator with an ordinary lamp cord. The PO told me it didn't mater which pole on the switch was wired to to which pole on the rotator, if switched the rotation directions are reversed. The switch is on the left side of the dash about even with the steering column.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • Dennis Rozell
    • Chris727
    • mcd
    • Bob75
    • Jonnysac
    • rokon2813
    • lugnard
    • bowhunt4life
  • Today's Birthdays

    1. MrSteele
      MrSteele
      (65 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
×