Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
GLPointon

A/C 410 shuttle to 3 speed?

Recommended Posts

GLPointon
I would like to convert my AC-410 shuttle to a 3 or 6 speed. Can a 3 speed trans from a 7016 be put into the 410? The sideplates are likly different but if swaped are they the right lenght to preserve the wheelbase of the 410? and would I have to swap the BGB too? I am begining to like the ruggedness of the 410 but I think it needs a more rugged trans... Thanks

Share this post


Link to post
Share on other sites
SmilinSam
Should work fine if you swap the 3 speed gearcase into the 410 framework using all the 410 hardware. The shuttle and 3 speed gear cases I believe are the same shape casting with same bolt up patterns. Six speed setup shouldnt be much trouble to install either. May need to drill some bolt holes in the 410 framework if they are not in the same places as the simplicity frame. Shouldnt need to swap gear boxes, shafts should be same length.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • SmilinSam
    • smalljob
    • haykarenhardy
  • Today's Birthdays

    1. BigNickNY
      BigNickNY
      (26 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×