Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
cojo92

trouble with 728 pivot point

Recommended Posts

cojo92
Im half way through my 728 restoration but i cant get the frame and the rear end sepreated . C ive heated it..nothing..soaked in PB Blaster for a while...nothing.... hammer it and have someone pull one side. it just wont budge. :(!

Share this post


Link to post
Share on other sites
timflury
quote:
Originally posted by Brettw
I have seen pictures on here, with one end chained to a tree, and the other chained to a truck to pull it apart.
Brett, This was done not too far from us. Pewaukee to be exact. http://simpletractors.com/club2/topic.asp?TOPIC_ID=111999 Scroll part way down. That is a late model M-35.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • BarryC
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×