Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

trouble with 728 pivot point


cojo92

Recommended Posts

Im half way through my 728 restoration but i cant get the frame and the rear end sepreated . C ive heated it..nothing..soaked in PB Blaster for a while...nothing.... hammer it and have someone pull one side. it just wont budge. :(!
Link to comment
Share on other sites

Keep it soaked like overnight in the PB. Twisting while pulling is the best motion to help it come apart. These were the most neglected lube points on the small frame FDT.
Link to comment
Share on other sites

quote:
Originally posted by Brettw
I have seen pictures on here, with one end chained to a tree, and the other chained to a truck to pull it apart.
Brett, This was done not too far from us. Pewaukee to be exact. http://simpletractors.com/club2/topic.asp?TOPIC_ID=111999 Scroll part way down. That is a late model M-35.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...