Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
tjwilliams

3416H Snow Thrower

Recommended Posts

tjwilliams
I recently bought a snow thrower for my Soveriegn 3416H and it doesn't fit up right....I amguuessing it is a model #564 which the manual shows the pulley in front of the grill.Can I make this one work? What models do fit the 3416H? Tim

Share this post


Link to post
Share on other sites
RayS
The 990564 more than likely has the hitch for a FDT like pictured on the cover of the manual. You will need the correct hitch for your 3416H and a front PTO on the engine. http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCBEN8arG6rE3Cvh5kbp796Dq You will need the hitch and PTO that is in the manual below. http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCBEN8arJ7rE3Cvh5kbp796Dq

Share this post


Link to post
Share on other sites
rfsmith1952
Here's a guy on ebay with front ptos in 1 inch and 1-1/8in varieties. If I remember right, it's the same set for either engine, just use different mounting holes on the fork. http://www.ebay.com/itm/Simplicity-Allis-Chalmers-Garden-Tractor-Complete-Front-Crankshaft-PTO-Drive-/280774481044?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item415f769494


Good luck, have fun, and happy thanksgiving Bob

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • rokon2813
    • BruceH
    • tadams
    • NateShedivy
    • bowhunt4life
  • Today's Birthdays

    1. sandyhillbill
      sandyhillbill
      (81 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×