Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Zach

F700 build thread

Recommended Posts

Zach
some of you might remember the post that Paul G. (ridgerunner) posted on the step by step build process for his f700 truck. he said it was posted here in the shop talk forum about 5 years ago. well i searched and can't find it....... anyone got any leads on where it ended up, i am inspired by the idea of an F700 and was hoping to build one this summer. any help would be greatly appreciated.

Share this post


Link to post
Share on other sites
RickS
Zach, I found it. I did a search for posts by Ridgerunner and Ford. [url]http://www.simpletractors.com/club2/topic.asp?ARCHIVE=true&TOPIC_ID=64759&whichpage=1&SearchTerms=ford[/url] Rick.......

Share this post


Link to post
Share on other sites
ridgerunner
Zach, If you have any questions, just ask. I still have the truck in the barn. The thread on the F700 that Rick found/linked, is locked for some reason? So you'll have to ask in this one.

Share this post


Link to post
Share on other sites
Zach
ok sounds good. Im gone get some money saved up over the winter and come spring buy a truck and start building. I'm sure i will have questions and i thank you for your support. And Rick an invite/test drive is definitely in your future :D

Share this post


Link to post
Share on other sites
Kent
quote:
Originally posted by ridgerunner
Zach, If you have any questions, just ask. I still have the truck in the barn. The thread on the F700 that Rick found/linked, is locked for some reason? So you'll have to ask in this one.
When old posts get archived, they're automatically locked...

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Who's Online (See full list)

    • deebig
    • GregB
    • Koabd1978
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×