Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

dave7016

single stage pulley size

Recommended Posts

dave7016
-I have been told you can go from the 7" pulley to a 5" or 6" on the single stage blower, and no belt mod. How much does this help for distance? -For guys that have done this is it worth doing? -anyone know the inner shaft size for these pulleys and where to get one? Thanks!

Share this post


Link to post
Share on other sites
Gary
I'm running the 5" pulley on my 42" blower. I've run this set up on my 917H Allis, and my 918H Agco. It works great, easily blowing the snow 30 - 40 feet:D You'll need a shorter belt than the ones for the 6" or 7" pulley.

Share this post


Link to post
Share on other sites
BLT
quote:
Originally posted by Gary
I'm running the 5" pulley on my 42" blower. I've run this set up on my 917H Allis, and my 918H Agco. It works great, easily blowing the snow 30 - 40 feet:D You'll need a shorter belt than the ones for the 6" or 7" pulley.
A 144" belt will do the trick with a 5" pulley. The difference in the two pulley diameters calculates out to a 3" shorter belt. An A-142 (1/2 X 144") belt from NAPA should do it.

Share this post


Link to post
Share on other sites
mendon-chalmers
Not to say your wrong sir but that's what I think I purchased 3 years ago when I changed mine over from the B112 and I have to have the adjusting pulley all the way to the rear to just get the indicator in the green (circumference difference divided by 2)it sure does bounce around so I'm guessing the full 6" difference may be correct?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×