Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
osenga

Coil showed up

Recommended Posts

osenga
Well got my new coil for the B/S model 19 today. All looks good and looks like so far it will line up just right . So soon as the leg get here thanks to Dan having one. And then will beable to hook it all up and see it she will run again . I don't have no doubts to it but probably made sure the points are in there yet (I hope) but once she runs my 725 will have the correct motor back in her. And if all goes good from there I will try to prep these 2 motors and get them painted up for tractors when they get to there turn in the near future also . I just keep thinking to my self how many I can start at once. I'm at 1 all tore down 3 in process of painting and going back together and 1 that is fair just minus the motor and thinking about knocking the B12 apart to start on it to . Just keep thinking that will or would make 8 tractors down for no work and only leave me one for winter to blow snow. So might hold off on the B12 for the blade work . But time will tell but I know how I am . Always going for a bigger challenge . And have a nice looking group to sit out since about all around me are into green or the other yellow.

Share this post


Link to post
Share on other sites
Kent
IMO, keep at least two running out of your collection. You always want a backup, if possible, in case Murphy decides to visit... Get down to one, and he's almost certain to come calling -- if your luck is anything like mine...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • a_sannine
    • TJay
    • deebig
    • MikeES
    • Cibolo
    • rokon2813
    • Talntedmrgreen
    • RayS
    • bruker1
    • GregB
  • Today's Birthdays

    1. BigNickNY
      BigNickNY
      (26 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×