Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
mikeman

rbt to fdt

Recommended Posts

mikeman
This is a question for MPH (Marty) how did you put foot rests on your 3314H-FDT? I just aquirred a 3314h and was planning on ditching the running boards with the proper foot rests.:D

Share this post


Link to post
Share on other sites
GregB
Never done that, but if I had to start the project I would find a set of B series foot rests and modify from there. Who knows they might actually bolt up after some hole drilling. As to Marty answering, maybe he went to Fairbanks to visit the "grand Goober" for Christmas.

Share this post


Link to post
Share on other sites
MPH
Actually I been in Anchorage city for almost 2 weeks now working on a house my daughter bought. 'bout to go nuts with all these red lights and cars. No clue how so many of you live with it. In Tok, waitting for 3 cars pulling out of the post office is a traffic jam. on the footdraging foot rest on the 3314 Mike, I used a set off a B-10 parts tractor. Seems I had to bolt a pice of angle to the inside of the frame to hold them and I know I had to cut a slot in them for the center lift to work. I'll try to remember to look when I get the joy of seeing the most beautiful red light in the state of Alaska, HOPEFULLY next monday.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • SmilinSam
    • Dennis Rozell
    • rbstuartjr
    • marksr
    • mikeman
    • bowhunt4life
    • smalljob
    • Mine19821
  • Today's Birthdays

    1. MrSteele
      MrSteele
      (65 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×