Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
JBLACK

Many thanks,(for the tiller info)

Recommended Posts

JBLACK
I just want to express my gratitude for all the help,drawings and suggestions.I have joined your club and I hope I can contribute in some small way.By the way here`s somthing thats been a bit confusing to me,I have 2 landlord tractors both are identicle except one is trimmed in white and one is trimmed in black. they look just like the 2 tractors in your new in 66 section. whats the difference?

Share this post


Link to post
Share on other sites
Kent
They are probably different year models, and may even have different HP engines, as the old Briggs evolved from 7 to 7.25 to 9 and finally 10HP over the years....

I'd suggest you get the MFR numbers off the black & silver decals next to the shifter and look them up in the X-reference table.... Then, we can probably figure that out.

Also, you can see when the engines were manufactured using the serial number, but this may not date the tractor (in the case of old in-stock engine, or a replacement engine). See the info in previous posts....

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Gary1920
    • Dave65
    • DaveBsACs
    • PhanDad
    • gwiseman
    • simplewrench
    • marksr
    • rich_kildow
    • WKostiwa
    • goatfarmer
    • Hick
    • RenegadeJ
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×