Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Modifier1

7114s Briggs starter

Recommended Posts

Modifier1
Hey whats the scoop on starters. ( a # 396306 ) I Went to the cabin to do a little plowing with my 7114 and the starter kicked in and out and once in a while it actually turned the motor over a little. The end cap started to smoke also. I went to pull it out and saw the starter drive was plastic and was mashed potatoes. I checked at Napa $115.00 w/shipping I checked ebay $34 to $102 new. Parts tree was $156.00. What is a reasonable price? I pulled the pulled the end cap off, it looks ok not burned up. Rebuild it? Thanks

Share this post


Link to post
Share on other sites
Brettw
Do some research, I will try to too. I have 2 starters for Briggs off of vanguard engines. I will ship ya one N/C, you pay the shipping. Prolly $10 or less USPS it fits it ships box. Only number I can find on either is on the shorter of the two 9609185M. Diameter and mounting brackets appear to be the same, slight difference in the "Bendix?". PM me if it works for you.


Share this post


Link to post
Share on other sites
BLT
I think the starters are basically the same except for the D.E. frame of which you have on your starter. Both your strtr body and Bretts strtr body should measure 4-3/8" give or take a couple of whiskers. And he has a good pinion too also, I'll bet.|)

Share this post


Link to post
Share on other sites
BLT
You have this guy in your own back yard and for approx $40.00 you can have new starter delivered to your door. http://www.psep.biz/store/contact_us.htm http://www.psep.biz/store/briggs_stratton_alternators_and_starters_by_oem_.htm

Share this post


Link to post
Share on other sites
Tarheel
If it smoked on you, I'd check to be sure one or more of the brushes aren't worn short or stuck. That also goes hand in hand with it not engaging every time IMO. Easy enough fix if it is.

Share this post


Link to post
Share on other sites
GLPointon
Plastic gears on starter are MUCH easier & cheaper to replace than flywheel ring gear.
quote:
Originally posted by Modifier1
Wht do they use plastic drives. I see they are sold by the bag full on ebay?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • simplewrench
    • Rigger9020
    • GregB
    • Brettw
    • smalljob
    • NateShedivy
    • tripleguy
    • MikeES
  • Today's Birthdays

    1. BigNickNY
      BigNickNY
      (26 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×