Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
s_stephen

914 diesel custom build ( done )

Recommended Posts

s_stephen
I had a few 900 series parts tractors luying around so i decided to build somthing unique. here is what i have so far


here i have streched the frame 3 1/4" and added engine mounts and set in the kubota d600 diesel engine.


I am adding power stearing from a sunstar


and I have streched the hood and 3 1/4" and i am putting a cowel on it like the b-110 and b-112






Share this post


Link to post
Share on other sites
s_stephen
here is an update on the 914. I got the fenders painted and striped, also got the radiator mounted and hood fab finished.










I will have more pics at the end of the week the frame will be painted and trans will be installed.

Share this post


Link to post
Share on other sites
goodtimo
That really looks great! I like the console you built into the hood. For a moment, I thought it was Chicago Bears colors until I read the message closer. :D
quote:
Originally posted by s_stephen
here is an update on the 914. I got the fenders painted and striped, also got the radiator mounted and hood fab finished.
[img]/club2/attach/s_stephen/2012-01-31 13.55.38.jpg[/img]

[img]/club2/attach/s_stephen/2012-01-31 17.07.20.jpg[/img]

[img]/club2/attach/s_stephen/2012-02-03 10.20.09.jpg[/img]

[img]/club2/attach/s_stephen/2012-02-07 17.08.43.jpg[/img]

[img]/club2/attach/s_stephen/2012-02-07 17.07.14.jpg[/img]
I will have more pics at the end of the week the frame will be painted and trans will be installed.

Share this post


Link to post
Share on other sites
Tarheel
Turn the hood cover around and make an intake scoop for a 671 GM blower ! LOL All kidding aside, you seem to have done what I have wanted to do for a good many years. I bet that diesel will be the perfect match for that machine. I can't tell from the pics, did you move the front axle forward or just extend the frame in front of the axle ?

Share this post


Link to post
Share on other sites
s_stephen
i actually cut and extended the frame at the back of the plate that the factory engine bolts didnt move the axel itself but the wholw front of the tractor. the extension is right under the oil filter on the kubota diesel in the above pic.

Share this post


Link to post
Share on other sites
s_stephen
quote:
Originally posted by Chris727
Is this the one you were going to hang the 60" deck under?
my 920 diesel is the one I was going to put the 60" deck under. however I took the front axle that I stretched off of the 920 and put on this one so I can put a 60" deck under it if I get a hold of one.

Share this post


Link to post
Share on other sites
gwiseman
quote:
Originally posted by s_stephen
I got the frame painted and bolted back to the trans and set the engine back in the tractor today.

Reminds me of those black Case Demonstrator farm tractors built in 70's. http://www.youtube.com/watch?v=cieV2SE9DPQ Always liked the looks of that tractor and I think this one is going to go right up there w/me as well.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×