Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
larry8200

BIG TEN In The Woods

Recommended Posts

larry8200
Almost feel guilty sometimes of how much I demand of this almost original BIG TEN.... NOT! Even though it stays outside and the temperature was zero this morning. Always starts right up. Really, all my old Briggs start up fine down well below zero. Good battery's. I have Exide 51R's in almost all my large frames.


























Share this post


Link to post
Share on other sites
larry8200
quote:
Originally posted by henroan
He probably has more than one going to waste^
Actually, that one came on my B-210. When I put it on it was hard to get in and out of and cramped with my 6'6" height. So I took it right back off. I have a second similar in storage. Both are for sale. "I can't even find one landlord in my area. I'm not even sure how many I've counted in your treeline....." Not Landlords, B-10, WH LT-1100, Yeoman 637, B-110, Broadmoor 5008 and Sovereign 3012V. The Landlords are carefully hidden away. :D

Share this post


Link to post
Share on other sites
larry8200
quote:
Originally posted by Mike-GA
Larry, What size tires are you running on the rear? They look wider than mine. B10 looks good.
Thanks, The old B is looking pretty good, if I do much more cosmetic work I wont really want to continue having it as a front line worker. It's close now. It has 23x8.5-12 on the back, they are the same as what was on it when I got it, and the same as my Landlord 2010. They came off a 3410 Landlord, and I think they are the correct tire/rim for a BIG TEN. The front tires are Carlisle highway trailer tires 17x4.5-8 and gives it a more pronounced nose up look. I am planning to put something closer to original back on it someday.

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Who's Online (See full list)

    • Bill725
    • Scott Salmons
    • bowhunt4life
    • Drhulv
    • a_sannine
    • deebig
    • BLT
  • Today's Birthdays

    1. B10Dave
      B10Dave
      (69 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×